epri pump inspection
General Information
Visual Inspection
- Look for any fluid dripping or pooling around the pump or any wet spots on the pump casing or nearby equipment.
- Check for any stains or discoloration on the pump or surrounding components that may indicate a leak.
- Visually inspect the entire pump casing, including the suction and discharge ports, for any visible cracks or signs of damage.
- Pay close attention to areas where the casing may be under stress, such as flange connections or welds.
- Examine the impeller blades and hub for any signs of wear, such as nicks, dents, or erosion.
- Look for any irregularities in the shape or surface of the impeller that may indicate excessive wear or erosion.
- Check the shaft for any visible signs of bending, twisting, or other damage.
- Inspect the bearings for any excessive play, noise, or overheating that may indicate misalignment or damage.
- Verify that the pump shaft and motor shaft are aligned properly.
- Check for any visible misalignment, such as offset couplings or visibly crooked shafts.
- Inspect all seals, gaskets, and packing for signs of leakage or wear.
- Look for any visible damage or deterioration in the sealing system components.
- Inspect all bolts, nuts, and fasteners for proper tightness.
- Look for any signs of loose or missing bolts or fasteners that may indicate a potential issue.
- Check the pump base for any visible cracks, shifting, or other signs of instability.
- Ensure that the pump base is properly aligned with the foundation and securely anchored.
Performance Testing
Electrical Components
Lubrication and Cooling System
- Check oil or grease reservoir
- Ensure oil or grease level is within acceptable range
- Inspect lubrication system
- Look for any signs of leaks
- Check for any blockages in the lubrication system
- Inspect cooling system (if applicable)
- Ensure cooling system is functioning properly
- Check oil or grease quality
- If oil or grease quality is not acceptable, replace it
- Verify functioning of alarms and sensors
- Check if lubrication and cooling system alarms and sensors are working properly
Use in Manifestly