Verificações mensais em compressos a parafuso

General Inspection

Check for any visible leaks or damages in the compressor

Inspect the electrical connections and ensure they are tight and secure

Verify the pressure gauges for accuracy and proper functioning

Check the oil level in the compressor and top up if necessary

Inspect the cooling system for any obstructions or damages

Ensure the compressor is properly grounded

Air Intake System

Inspect the air filters and clean or replace them if dirty

Verify the intake ducts for any blockages or damages

Check the air flow and ensure it is sufficient

Lubrication System

Inspect the oil filter and replace if necessary

Check the oil cooler for any leaks or damages

Verify the oil pressure and temperature gauges for accuracy

Ensure the oil level in the reservoir is within the recommended range

Cooling System

Inspect the cooling fan and ensure it is functioning properly

Check the coolant level and top up if needed

Inspect the radiator for any damages or clogs

Verify the temperature gauge for accuracy

Electrical System

Inspect the control panel for any loose or damaged wires

Check the voltage and amperage readings on the control panel

Ensure all safety switches and emergency stop buttons are in working condition

Verify the proper functioning of motor starters and contactors

Noise and Vibration

Listen for any abnormal noises or vibrations during operation

Inspect the mounting bolts and tighten if necessary

Check for any loose or worn-out parts that may cause noise or vibration

Performance Testing

Monitor the compressor's discharge pressure and compare it to the recommended operating range

Verify the capacity and efficiency of the compressor

Check the compressor's power consumption and compare it to the manufacturer's specifications

Record and document any deviations from normal performance

Safety

Ensure all safety guards and covers are in place

Verify the presence and functionality of safety relief valves

Check the pressure relief valves for proper operation

Inspect the compressor's safety signage and warnings

Maintenance and Cleaning

Follow the manufacturer's recommendations for routine maintenance tasks

Clean the compressor and its surrounding area from any dirt or debris

Lubricate any moving parts as per the manufacturer's instructions

Keep a record of all maintenance activities performed

Note: This checklist may vary depending on the specific model and manufacturer of the screw compressor. It is important to refer to the manufacturer's manual and guidelines for accurate and detailed instructions.