AI Checklist Generator

Email address

Home > 1 step polishing process on the surface of the car paint

1 step polishing process on the surface of the car paint

Wash the car thoroughly to remove dirt and debris.

Dry the surface with a microfiber towel to prevent water spots.

Inspect the paint for scratches, swirls, or imperfections.

Gather polishing compound suitable for your paint type.

Select the appropriate polishing pad (foam, microfiber, etc.).

Prepare a dual-action or rotary polisher.

Have a clean microfiber towel for buffing.

Apply a small amount of polishing compound to the pad.

Set the polisher to a low speed and spread the compound evenly.

Increase the speed and work in small sections using overlapping passes.

Keep the pad flat against the surface, applying light pressure.

Wipe off any residue with a clean microfiber towel after polishing each section.

Examine the surface under good lighting to check for improvement.

Repeat the polishing process on areas that need extra attention.

Clean the pads and tools used for polishing.

Apply a wax or sealant for added protection and shine.

Buff the wax/sealant with a clean microfiber towel for a flawless finish.

Step back and admire the polished surface!

Hey there! Here's a little about us or visit our recurring workflow SaaS: Manifestly Checklists

Light Dark