AI Checklist Generator

Email address

Home > 10T crance cleaning lubrication inspection and testing check sheet

10T crance cleaning lubrication inspection and testing check sheet

Ensure the crane is powered off and secured before cleaning.

Remove any loose debris and dirt from the crane's exterior.

Clean all accessible surfaces using appropriate cleaning agents.

Inspect and clean the crane’s hooks and latches.

Check and clean the control panels and buttons.

Inspect and clean the operator's cabin and seating area.

Check the lubrication points as per the manufacturer's specifications.

Apply lubricant to the crane's moving parts (joints, gears, etc.).

Inspect the condition of the lubrication system.

Ensure that all grease fittings are accessible and functioning properly.

Verify that the correct type of lubricant is used for each component.

Conduct a visual inspection of the crane structure for any signs of damage or wear.

Inspect the hoist mechanism for proper operation.

Check wire ropes for fraying, kinks, or other damage.

Examine the brakes for proper function and wear.

Test the safety devices, including limit switches and emergency stop buttons.

Inspect electrical connections for corrosion or loose connections.

Perform a load test to ensure the crane can handle its rated capacity.

Test all operational controls for responsiveness and accuracy.

Check the functionality of the warning systems (lights, alarms).

Conduct a stability test to ensure the crane operates safely under load.

Document all test results and any discrepancies found during the testing.

Record the date of inspection and cleaning.

Note any repairs or maintenance performed.

List any parts that require replacement or further attention.

Ensure all findings are communicated to relevant personnel.

Archive the checklist for future reference and compliance verification.

Hey there! Here's a little about us or visit our recurring workflow SaaS: Manifestly Checklists

Light Dark