Generate a checklist for wheel loader with standard BS EN 474-1

Pre-operational Check

  • Locate the fuel gauge on the dashboard
  • Ensure the fuel level is above the minimum mark
  • Locate the engine oil dipstick
  • Remove the dipstick and wipe it clean
  • Reinsert the dipstick fully and then check the oil level
  • Locate the hydraulic fluid reservoir
  • Check that the fluid level is between the minimum and maximum marks
  • Locate the coolant reservoir
  • Ensure the coolant level is between the minimum and maximum marks
  • Use a tire pressure gauge to check the pressure of each tire
  • Refer to the manufacturer's guidelines for the correct tire pressure

Cab Check

Bucket Check

Engine Check

Hydraulic System Check

Brake System Check

Overall Inspection

Post-operational Check