AI Checklist Generator

From the makers of Manifestly Checklists

Email address

Home > Construction > monthly check generator

monthly check generator

Generator Exterior

Inspect for any visible damage or leaks

Clean the exterior surfaces of the generator

Check the condition and tightness of bolts and fasteners

Ensure proper ventilation around the generator

Verify that the exhaust system is clear and functioning correctly

Check for any signs of corrosion or rust

Inspect the fuel tank for any leaks or damage

Ensure the generator is properly grounded

Check the condition of the generator cover or enclosure

Generator Fuel System

Check the fuel level and top up if necessary

Inspect the fuel lines for any leaks or damage

Clean or replace the fuel filters as required

Test the fuel pump and ensure proper functioning

Inspect the fuel tank for any debris or contamination

Verify that the fuel shut-off valve is functioning correctly

Generator Electrical System

Test the battery and verify its charge level

Inspect the battery terminals for corrosion and clean if needed

Check the condition of the spark plugs and replace if necessary

Inspect the wiring and connections for any signs of damage or loose connections

Test the voltage regulator and ensure proper voltage output

Verify the proper functioning of the control panel and switches

Test the automatic transfer switch (if applicable)

Inspect and clean the generator's electrical outlets

Generator Cooling System

Check the coolant level and top up if needed

Inspect the radiator or heat exchanger for any leaks or damage

Clean the radiator fins and remove any debris or obstructions

Test the coolant heater (if equipped) for proper operation

Inspect the hoses and belts for any signs of wear or damage

Verify the functioning of the coolant temperature sensor

Generator Engine

Change the engine oil and replace the oil filter

Inspect the air filter and clean or replace if necessary

Check the condition of the drive belts and adjust tension if needed

Test the engine's starting system and ensure proper cranking

Inspect the engine mounts and tighten if necessary

Monitor the engine's running condition and listen for any unusual noises

Generator Transfer Switch (if applicable)

Inspect the transfer switch enclosure for any signs of damage or corrosion

Test the transfer switch operation under load conditions

Verify the proper functioning of the switch's automatic and manual modes

Check the connections and wiring for any signs of damage or loose connections

General Safety Checks

Ensure proper signage is displayed around the generator area

Inspect fire extinguishers and ensure they are in proper working condition

Verify that emergency stop buttons are easily accessible and functioning correctly

Check all safety devices and features, such as low oil pressure shutdown and high-temperature shutdown

Note: This checklist is a general guide and may need to be customized based on the specific generator model and manufacturer recommendations.

Download CSV Download JSON Download Markdown

Use in Manifestly

Related Checklists

Subcontractor Performance Checklist

A Subcontractor Performance Checklist is an important tool for ensuring that subcontractors are meeting all contractual requirements and delivering a quality end product.

view →

Punch List Checklist

A Punch List Checklist is essential for ensuring that all construction tasks are completed to the agreed upon standards and specifications.

view →

Pre-Construction Checklist

A Pre-Construction Checklist is essential to ensure that all parties have a clear understanding of the project scope, timeline, and budget before construction begins.

view →

Project Bid Checklist

A Project Bid Checklist is an essential tool for ensuring that the bidding process is fair, accurate, and comprehensive.

view →

Site Clean Up Checklist

A Site Clean Up Checklist is an important tool for ensuring that a construction site is in compliance with safety and environmental regulations.

view →

Project Closeout Checklist

The Project Closeout Checklist is an essential tool to ensure that all project deliverables have been met and that all stakeholders have been satisfied with the project's outcome.

view →

Safety Checklist

A Safety Checklist is essential to ensure that all necessary safety precautions are taken to reduce the risk of injury or damage on a construction site.

view →

Project Quality Control Checklist

A Project Quality Control Checklist is an essential tool for ensuring that all aspects of a project are completed to the highest standards of quality.

view →

Daily Log Checklist

A Daily Log Checklist is an essential tool to ensure that all construction tasks are completed on-time and to budget.

view →

Payment Request Checklist

A Payment Request Checklist is essential for ensuring that all relevant information is included in payment requests and that payments are made correctly and on time.

view →

Change Order Request Checklist

A Change Order Request Checklist is essential for ensuring that all changes to the project are properly documented, approved and accounted for.

view →

Equipment Maintenance Checklist

A properly completed Equipment Maintenance Checklist is important for ensuring that all necessary maintenance activities are completed on time and in accordance with safety standards.

view →

Job Cost Tracking Checklist

The Job Cost Tracking Checklist is essential for controlling costs and ensuring projects are completed on time and within budget.

view →

Hey there! Here's a little about us or visit our recurring workflow SaaS: Manifestly Checklists

Light Dark