Un safe action and un safe condition finding checklist

Unsafe Actions

Failure to wear personal protective equipment (PPE)

Check if the worker is wearing the required PPE for their task
Inspect if the PPE is in good condition and properly fitted
Ensure that the worker understands the importance of wearing PPE

Incorrect lifting techniques

Observe workers to identify if they are using proper lifting techniques
Provide training on correct lifting techniques if necessary
Implement measures to reduce the need for heavy lifting

Not following lockout/tagout procedures

Verify if workers are following lockout/tagout procedures when working on machinery
Conduct regular audits to ensure compliance with lockout/tagout policies
Reinforce the importance of lockout/tagout procedures through training

Running in work areas

Monitor work areas to identify instances of workers running
Implement clear signage and reminders to discourage running
Educate workers on the risks of running in work areas

Failure to use safety harnesses when working at heights

Check if workers are wearing safety harnesses when working at heights
Ensure that safety harnesses are provided and properly maintained
Train workers on the correct use of safety harnesses

Not adhering to posted warning signs

Failing to use appropriate safety equipment when operating machinery

Failure to use proper safety guards when operating machinery

Failure to use the correct materials in construction

Operating equipment without proper training

Working without adequate lighting

Ignoring warnings from colleagues

Working without a safety plan in place

Performing maintenance on equipment without proper authorization

Working in an area where hazardous materials are present without proper safety precautions

Working in confined spaces without proper safety measures

Performing hazardous tasks without proper safety precautions

Unsafe Conditions

Obstructed emergency exits

Wet or slippery floors

Poor lighting in work areas

Damaged or defective equipment

Lack of proper maintenance of machinery

Unsafe Actions

Failure to use seatbelts in vehicles

Improper use of power tools

Skipping safety training sessions

Disregarding warning signs

Not reporting near misses or accidents

Unsafe Conditions

Overloaded storage shelves

Blocked fire extinguishers or fire exits

Lack of safety guards on machinery

Exposed electrical wires or outlets

Unsafe Actions

Horseplay or practical jokes in the workplace

Failure to follow proper chemical handling procedures

Improper disposal of hazardous waste

Ignoring safety protocols in hazardous areas

Using damaged or expired safety equipment

Unsafe Conditions

Lack of proper signage and labeling

Uneven or damaged walking surfaces

Insufficient fire suppression systems

Inadequate first aid supplies

Poor housekeeping practices

Remember to customize this checklist according to your specific workplace and industry, as different hazards may exist depending on the nature of the work environment.