Mechanics Motorcycle Roadworthy checklist for Victoria Australia

Lighting and Visibility

Headlights*: Check for proper functioning and alignment.

Indicators*: Ensure all indicators are working correctly.

Brake Lights*: Test brake lights for functionality.

Reflectors*: Verify that all required reflectors are present and securely attached.

Mirrors*: Inspect and adjust mirrors for proper visibility.

Horn: Ensure the horn is working properly

High beams: Make sure the high beams are functioning correctly

Plate lights: Test plate lights to verify that they are working

Auxiliary lights: Check for proper functioning of any auxiliary lights

Brakes and Suspension

Brakes*: Test front and rear brakes for effectiveness and proper operation.

Brake Lines*: Inspect brake lines for any leaks or damage.

Suspension*: Check for any signs of leaks, damage, or excessive wear.

Steering*: Verify that the steering is smooth and responsive.

Tyres and Wheels

Tyres*: Inspect tyre condition, including tread depth and any signs of damage.

Wheel Bearings*: Check wheel bearings for smooth operation.

Wheel Alignment*: Verify proper wheel alignment to ensure stability.

Engine and Transmission

Oil*: Check engine oil level and condition.

Cooling System*: Inspect coolant level and condition.

Air Filter*: Verify air filter cleanliness and replace if necessary.

Exhaust System*: Inspect for leaks and excessive noise.

Drive Chain*: Examine the chain for proper tension and lubrication.

Frame and Body

Frame*: Inspect frame for any signs of damage or cracks.

Fairings*: Check fairings for secure attachment and any damage.

Seat*: Ensure seat is securely fastened and in good condition.

Handlebars*: Check handlebars for any signs of damage or loose components.

Controls*: Test all controls, including throttle, clutch, and brakes.

Safety Equipment

Horn*: Check if the horn is working properly.

Helmet*: Verify that the helmet meets safety standards and is in good condition.

Protective Clothing*: Check the rider's protective clothing for proper fit and condition.

Rider Footwear*: Ensure the rider's footwear provides adequate protection.

Brake Pads*: Inspect brake pads for wear and replace if necessary.

Miscellaneous

Number Plate*: Verify that the number plate is securely attached and legible.

Side Stand*: Check side stand operation and ensure it is secure.

Fuel System*: Ensure there are no leaks or blockages in the fuel system.

Battery*: Check battery condition and connections.

Wiring*: Inspect all wiring connections for security and proper insulation.

Note: This checklist is based on the ADR (Australian Design Rules) requirements and may not cover all specific regulations for a motorcycle roadworthy inspection in Victoria, Australia. It is recommended to consult the official ADR guidelines and the relevant authorities for the most accurate and up-to-date information.