Create a service checklist for a race car

Pre-Race Inspection

Check tire pressure and condition

Inspect suspension and steering components for wear or damage

Verify proper functioning of brakes and brake pads

Check all fluid levels (engine oil, coolant, brake fluid, etc.)

Inspect belts and hoses for signs of wear or leaks

Check battery charge and connections

Verify proper functioning of all lights and signals

Inspect safety equipment (harnesses, fire extinguisher, etc.)

Check fuel level and fuel system for leaks or damage

Engine Service

Change engine oil and filter

Inspect and replace spark plugs if necessary

Check and adjust ignition timing

Inspect air filter and clean or replace if necessary

Inspect and tighten all engine mounts and brackets

Check and adjust valve lash if applicable

Inspect and replace any worn or damaged belts

Verify proper functioning of all sensors and gauges

Transmission and Drivetrain

Check transmission fluid level and condition

Inspect and replace transmission filter if necessary

Inspect and adjust clutch if applicable

Inspect and replace worn or damaged drivetrain components (driveshaft, axles, etc.)

Verify proper functioning of differential and limited slip if applicable

Check and adjust gear ratios if necessary

Inspect and tighten all drivetrain mounts and brackets

Chassis and Body

Inspect and tighten all suspension components (shocks, bushings, etc.)

Check and adjust camber, caster, and toe settings

Verify proper functioning of steering system

Inspect and tighten all chassis and body mounts

Check for any signs of stress or damage on the body panels

Verify proper functioning of all safety features (roll cage, seat belts, etc.)

Inspect and clean radiator and cooling system

Check and adjust aerodynamic components if applicable

Electrical System

Inspect and tighten all electrical connections

Check and replace any faulty or worn wiring

Verify proper functioning of all switches and controls

Test and replace any malfunctioning electrical components (starter motor, alternator, etc.)

Inspect and clean battery terminals

Verify proper functioning of ignition system

Check and replace any blown fuses or relays

Final Checks and Pre-Race Preparation

Double-check all fluid levels and top up if necessary

Verify proper functioning of all systems by performing a test run

Adjust tire pressures and temperatures for optimal performance

Ensure all safety equipment is in place and functioning properly

Finalize race strategy and familiarize with the race track

Perform any last-minute adjustments or tweaks based on driver feedback

Remember to adapt and customize this checklist according to the specific needs and requirements of your race car.