A detailed Booster Pump QUARTERLY preventive maintenance checklists
1. Safety Precautions
2. Visual Inspection
- Inspect joints and fittings closely.
- Look for wet spots or puddles.
- Check for signs of fluid accumulation.
- Note the type of fluid if visible.
- Look for cracks, dents, or corrosion.
- Check for loose or missing bolts.
- Assess the overall structural integrity.
- Inspect for signs of overheating or discoloration.
- Check for frayed wires or loose connections.
- Look for discoloration or rust on terminals.
- Ensure all connections are secure.
- Inspect insulation integrity around wires.
- Look for bulges, cracks, or abrasions.
- Check for signs of leaks at connections.
- Assess hose flexibility and suppleness.
- Ensure clamps are tight and fittings are secure.
- Inspect joints and fittings closely.
- Look for wet spots or puddles.
- Check for signs of fluid accumulation.
- Note the type of fluid if visible.
- Look for cracks, dents, or corrosion.
- Check for loose or missing bolts.
- Assess the overall structural integrity.
- Inspect for signs of overheating or discoloration.
- Check for frayed wires or loose connections.
- Look for discoloration or rust on terminals.
- Ensure all connections are secure.
- Inspect insulation integrity around wires.
- Look for bulges, cracks, or abrasions.
- Check for signs of leaks at connections.
- Assess hose flexibility and suppleness.
- Ensure clamps are tight and fittings are secure.
- Inspect all metal components thoroughly.
- Identify any flaking or peeling paint.
- Assess the extent of corrosion present.
- Take note of areas needing treatment.
- Use a straightedge or level for assessment.
- Look for uneven wear on mounting surfaces.
- Check for any excessive vibration during operation.
- Adjust as necessary for proper alignment.
- Look for cracks or missing pieces.
- Check for excessive wear on pads.
- Ensure mounts are securely attached.
- Assess their ability to absorb vibrations.
- Check for cracks or loose fittings.
- Ensure covers are securely in place.
- Inspect for any signs of impact damage.
- Verify that guards do not obstruct operation.
- Check for faded or illegible labels.
- Ensure tags are securely affixed.
- Replace any damaged or missing labels.
- Confirm tags contain correct information.
- Inspect for scoring or pitting on surfaces.
- Check for debris accumulation.
- Assess for any unusual sounds during operation.
- Take note of any performance issues.
- Remove and inspect for blockages.
- Clean or replace as necessary.
- Check for signs of wear or damage.
- Ensure proper reinstallation after inspection.
- Remove any debris or obstructions.
- Ensure adequate space for maintenance access.
- Check for spills or leaks needing cleanup.
- Assess safety around the work area.
- Check for missing or damaged barriers.
- Ensure guards are properly attached.
- Verify that all safety features are functional.
- Assess compliance with safety regulations.
- Look for visible cracks or settling.
- Check for signs of moisture or erosion.
- Ensure the base is level and stable.
- Assess for any movement or vibration.
Use in Manifestly