A detailed Deaerator DAILY preventive maintenance checklists
1. Visual Inspection
2. Operational Checks
3. Water Quality Assessment
- Use a dissolved oxygen meter for accuracy.
- Calibrate the meter as per manufacturer's instructions.
- Take samples from various points in the system.
- Record the values and compare against acceptable levels.
- Use a calibrated pH meter for measurement.
- Rinse the electrode with distilled water before testing.
- Take readings at different locations if necessary.
- Document the pH values and ensure they meet standards.
- Visually examine the water for discoloration.
- Look for floating particles or sediments.
- Check for any oily films on the surface.
- Document any abnormalities for further analysis.
- Use a TDS meter for accurate measurement.
- Calibrate the meter according to manufacturer guidelines.
- Take readings at different points in the system.
- Record the TDS levels and compare with acceptable limits.
- Use a chloride test kit or meter.
- Collect water samples from various locations.
- Follow the kit instructions for accurate results.
- Document chloride levels and assess against thresholds.
- Utilize a conductivity meter for testing.
- Calibrate the meter before use as required.
- Take readings from multiple points for consistency.
- Record results and compare them to acceptable ranges.
- Conduct a smell test by carefully wafting air above the water.
- Identify any chemical or organic odors.
- Document any unusual smells for further investigation.
- Consider further testing if odors persist.
- Use a hardness test kit as per instructions.
- Collect samples from the feedwater system.
- Follow the kit's procedure for accurate results.
- Document hardness levels and check against standards.
- Use a silica test kit or appropriate analytical method.
- Collect samples from the deaerator system.
- Follow the kit instructions carefully.
- Record silica levels and compare to operational limits.
- Use a turbidity meter or Secchi disk for testing.
- Take water samples from different areas.
- Record turbidity readings according to standards.
- Assess results to determine water clarity.
- Use a calibrated thermometer for accurate readings.
- Measure temperature at various points in the system.
- Document the temperature and ensure it meets operational requirements.
- Note any significant deviations for further review.
- Check inventory records for treatment chemicals used.
- Inspect for any visible residues in the system.
- Conduct tests for specific biocides as necessary.
- Document findings and ensure proper dosing.
- Create a detailed log of all observations.
- Note the date, time, and specific conditions.
- Report any issues to the maintenance team.
- Review logs regularly for trends or recurring problems.
Use in Manifestly