A detailed Hydromotor WEEKLY preventive maintenance Inspection checklist
1. Safety Precautions
2. Visual Inspection
3. Fluid Levels
4. Operational Checks
5. Component Checks
6. Cleanliness
- Use a soft brush or vacuum to collect loose dirt.
- Wipe surfaces with a damp cloth to remove stubborn debris.
- Dispose of collected dirt and debris in accordance with safety guidelines.
- Use a suitable cleaning agent for the surface material.
- Apply cleaner with a cloth or sponge; avoid excess moisture.
- Rinse and dry surfaces thoroughly to prevent residue.
- Inspect vents visually for any visible blockages.
- Use compressed air or a brush to clear dust.
- Check airflow functionality, ensuring unobstructed operation.
- Remove filters according to manufacturer instructions.
- Rinse filters with water or use a soft brush.
- Reinstall filters securely after ensuring they are clean.
- Use a lint-free cloth to wipe hoses and connections.
- Check for signs of leaks during the cleaning process.
- Report any leaks or damage to maintenance personnel.
- Inspect seals and gaskets for dirt or deterioration.
- Clean seals gently with a soft cloth or brush.
- Replace any worn or damaged seals as needed.
- Inspect the area for any spills or contamination.
- Use absorbent materials to clean spills immediately.
- Ensure proper disposal of any hazardous materials.
- Wipe tools with a clean, dry cloth after use.
- Use disinfectant wipes for tools that contact fluids.
- Store cleaned tools in designated areas to avoid contamination.
- Apply a degreaser to affected areas.
- Use a scrubbing pad to remove stubborn residue.
- Rinse surfaces with water and dry thoroughly.
- Disconnect power before inspecting electrical components.
- Use a soft brush to remove dust from terminals.
- Apply contact cleaner if corrosion is detected.
- Check safety guards visually for cleanliness.
- Wipe down guards with a damp cloth to remove dust.
- Ensure guards are securely fastened after cleaning.
Use in Manifestly