A detailed Impact Crusher WEEKLY preventive maintenance Inspection checklist
1. Safety Precautions
2. Visual Inspection
3. Mechanical Components
4. Electrical Systems
5. Lubrication
6. Operational Checks
7. Documentation
8. Cleanliness
- Use a broom or air blower to remove loose debris.
- Scrape off any hardened material with a suitable tool.
- Inspect areas where debris accumulates for signs of wear.
- Ensure that no debris obstructs moving parts.
- Remove any tools, parts, or materials left around the machine.
- Check pathways for access and ensure they are clear.
- Organize storage areas nearby to prevent clutter.
- Mark off areas that should remain unobstructed.
- Inspect drainage channels for signs of blockage.
- Remove any debris or sediment causing obstruction.
- Ensure water flows freely away from the machine.
- Test drainage after cleaning to confirm effectiveness.
- Use a broom or air blower to remove loose debris.
- Scrape off any hardened material with a suitable tool.
- Inspect areas where debris accumulates for signs of wear.
- Ensure that no debris obstructs moving parts.
- Remove any tools, parts, or materials left around the machine.
- Check pathways for access and ensure they are clear.
- Organize storage areas nearby to prevent clutter.
- Mark off areas that should remain unobstructed.
- Inspect drainage channels for signs of blockage.
- Remove any debris or sediment causing obstruction.
- Ensure water flows freely away from the machine.
- Test drainage after cleaning to confirm effectiveness.
- Use a damp cloth to wipe surfaces thoroughly.
- Apply a mild detergent if necessary for stubborn grime.
- Dry surfaces to prevent rust and corrosion.
- Pay attention to areas around control panels and gauges.
- Check for dust and debris buildup in these areas.
- Use compressed air to blow out any obstructions.
- Inspect for signs of wear or damage to components.
- Ensure that all covers are securely fastened after cleaning.
- Identify all areas with spills or leaks.
- Use absorbent materials to soak up spills.
- Dispose of waste materials in accordance with regulations.
- Check floors for any remaining slippery spots.
- Inspect conveyor belts for debris stuck to the surface.
- Use a scraper to remove material buildup on the belts.
- Ensure pulleys and rollers are free from obstructions.
- Check for proper belt tension and alignment.
- Remove dust and debris from safety guards.
- Ensure that all guards are securely attached.
- Inspect for any signs of damage or wear.
- Replace any broken or missing guards immediately.
- Collect trash and waste materials for disposal.
- Use designated bins for recycling where applicable.
- Ensure the area is tidy and organized.
- Encourage adherence to cleanliness protocols among staff.
- Wipe down ladders and access platforms with a cloth.
- Check for any loose rungs or structural issues.
- Ensure that surfaces are free from oil or grease.
- Mark any access points that require repairs.
- Remove filters/screens carefully to avoid damage.
- Use compressed air or a soft brush to clean them.
- Inspect for wear and replace if necessary.
- Reinstall filters/screens securely after cleaning.
- Return all tools to their designated storage areas.
- Organize tools to facilitate easy access for future use.
- Check for any tools left inside the machine.
- Conduct a final sweep of the area before concluding maintenance.
Use in Manifestly