A detailed WATER Cooled Transformer DAILY preventive maintenance checklists
Visual Inspection
- Look for wet spots, rust, or discoloration.
- Check all joints and seams for signs of leakage.
- Examine paint for bubbling or peeling indicating corrosion.
- Note any areas requiring further investigation or repair.
- Listen for grinding, rattling, or humming sounds.
- Feel for excessive vibrations on the transformer surface.
- Document any irregularities for further analysis.
- Ensure the environment is quiet for accurate assessment.
- Verify all screws and bolts are tight.
- Check for gaps or misalignments in enclosures.
- Inspect seals for integrity and damage.
- Report any missing or damaged covers immediately.
- Look for dents, cracks, or deformation.
- Assess for any loose parts or components.
- Evaluate the overall structural integrity.
- Document any damage found for repair actions.
- Review alignment of all mounting brackets.
- Ensure all components are flush and stable.
- Tighten any loose fasteners as needed.
- Document any misalignments for correction.
- Look for frayed or exposed wires.
- Check insulation for discoloration or cracking.
- Ensure connections are secure and free from corrosion.
- Replace any damaged insulation as necessary.
- Inspect surfaces around electrical connections for discoloration.
- Check for any burn marks or melted components.
- Feel for heat emitted from the transformer.
- Document and address any overheating issues immediately.
- Check hoses and fittings for moisture or drips.
- Inspect for cracks or signs of wear.
- Ensure all connections are tight and leak-free.
- Replace any damaged components as necessary.
- Check for wear or fading on labels.
- Ensure all identification plates are securely fastened.
- Replace any missing or illegible labels.
- Document any discrepancies found.
- Inspect drainage outlets for any visible obstructions.
- Clear any debris or blockages found.
- Ensure drainage pathways are clear and functional.
- Document any issues affecting drainage.
- Look for signs of wear or degradation.
- Check hose connections for tightness and leaks.
- Replace any damaged hoses or pipes immediately.
- Document any findings for maintenance records.
- Inspect grounding wires for secure connections.
- Look for rust or corrosion on grounding points.
- Tighten any loose connections as necessary.
- Document any grounding issues for resolution.
- Inspect for nests or droppings near the transformer.
- Check for gnawed wires or insulation.
- Document any signs of pest activity.
- Implement pest control measures if necessary.
- Check for dirt, dust, or debris accumulation.
- Ensure work areas are tidy and organized.
- Schedule cleaning if necessary.
- Document any cleanliness issues found.
Use in Manifestly