AI Checklist Generator

From the makers of Manifestly Checklists

Email address

Home > Transportation > boeing 737 max-8 Cold and Dark Start-Up

boeing 737 max-8 Cold and Dark Start-Up

Preparation

Ensure the aircraft is secured and chocked.

Confirm that all maintenance actions are complete.

Verify that the external power unit (GPU) is connected and operational.

Check that the parking brake is set.

Review the aircraft's status and maintenance logs.

Cockpit Setup

Enter the cockpit and perform a general visual inspection.

Ensure all circuit breakers are in the correct position.

Set the battery switch to the "ON" position.

Check that the standby power switch is set to "AUTO."

Verify that the fire detection system is operational.

Flight Deck Configuration

Set the EFIS control panel to the desired range and mode.

Adjust the overhead panel lights and instrument lights as needed.

Set the altimeter to the current local pressure setting.

Configure the flight management system (FMS) and enter the flight plan.

Engine Start Preparation

Ensure the fuel quantity is sufficient for the planned flight.

Check the fuel control switches are in the "ON" position.

Confirm that the engine start levers are in the "CUTOFF" position.

Verify that the thrust levers are at the idle position.

Engine Start Procedure

Set the APU switch to "START" and monitor the start cycle.

Once the APU is running, set the APU bleed air switch to "ON."

Confirm that the engine start levers are in the "IDLE" position.

Start engine #1 by pressing the engine start button and monitor parameters.

Repeat the engine start process for engine #2.

Post-Start Checks

Monitor engine parameters (N1, N2, EGT) for normal operation.

Confirm that all warning lights are extinguished.

Set the engine start levers to "RUN."

Check the hydraulic systems for proper pressure.

Verify that the environmental control systems are operational.

Final Preparations

Complete the before taxi checklist.

Confirm that all crew members are briefed and ready for departure.

Review the departure procedures and any relevant NOTAMs.

Conduct a final visual inspection of the exterior and cockpit.

Departure Clearance

Request and receive departure clearance from air traffic control.

Set the transponder to the assigned code and confirm operation.

Ensure all systems are configured for the departure phase of flight.

Download CSV Download JSON Download Markdown

Use in Manifestly

Related Checklists

Equipment Inventory

Equipment Inventory is essential for ensuring that the right transportation vehicles and parts are available when needed.

view →

Driver Training Checklist

Driver Training Checklist is important for ensuring that all drivers are properly trained and qualified to operate a vehicle safely and efficiently.

view →

Fleet Management Checklist

A Fleet Management Checklist is an essential tool for ensuring that all vehicles and equipment are regularly maintained, safe, and compliant with regulations.

view →

Shipping Checklist

A shipping checklist is essential to ensure that all packages are properly prepared and safely shipped to their destination.

view →

Pre-Trip Checklist

A pre-trip checklist is essential to ensure the safety of passengers and other motorists by ensuring that the vehicle is in good condition before taking off.

view →

Vehicle Maintenance Checklist

A Vehicle Maintenance Checklist is an essential tool for ensuring vehicles are in good condition and safe to operate.

view →

Delivery Checklist

A delivery checklist helps to ensure a safe, efficient, and timely delivery of goods.

view →

Hazardous Materials Checklist

The Hazardous Materials Checklist is an important tool to help ensure that hazardous materials are handled, transported, and disposed of safely.

view →

Fueling Checklist

A Fueling Checklist is important to ensure that all necessary safety precautions are taken before fueling a vehicle.

view →

Security Checklist

A security checklist is essential for ensuring the safety of passengers and cargo during transportation.

view →

Vehicle Inspection Checklist

A Vehicle Inspection Checklist is an important tool for ensuring the safety and reliability of a vehicle by regularly checking for any potential problems.

view →

Vehicle Cleanliness

Vehicle cleanliness is important for ensuring passengers have a safe, comfortable, and hygienic ride.

view →

Driver Safety Checklist

Driver Safety Checklist is essential for ensuring that drivers are aware of and prepared to follow safety protocols and practices.

view →

Post-Trip Checklist

Post-Trip Checklists are important for ensuring that all vehicles have been properly inspected and maintained before and after trips.

view →

Hey there! Here's a little about us or visit our recurring workflow SaaS: Manifestly Checklists

Light Dark