car detailing
Exterior Detailing
- Gather necessary supplies: bucket, sponge, hose.
- Fill bucket with water and add pH-balanced soap.
- Start from the top and work downwards.
- Use a sponge to gently scrub the surface.
- Pay attention to wheels and lower panels.
- Use a hose with a spray nozzle.
- Begin rinsing from the top, allowing water to flow down.
- Ensure all soap suds are removed from all surfaces.
- Focus on crevices and hard-to-reach areas.
- Check for any remaining soap before drying.
- Choose a quality wax or sealant product.
- Ensure the surface is clean and dry.
- Use an applicator pad to spread the product evenly.
- Work in small sections for better coverage.
- Allow to haze, then buff with a microfiber cloth.
Interior Detailing
- Take out all items from seats, console, and floor.
- Check under seats and in storage compartments.
- Sort items into keep, discard, and donate piles.
- Use a vacuum with attachments for tight spaces.
- Vacuum all surfaces thoroughly, including under mats.
- Pay attention to crevices and seams for debris.
- Use a leather cleaner to remove dirt and grime.
- Apply a conditioner to restore moisture and sheen.
- Buff with a microfiber cloth for a smooth finish.
- Select cleaners based on surface material (plastic, metal).
- Use a microfiber cloth to avoid scratches.
- Ensure all surfaces are thoroughly cleaned and dried.
- Use glass cleaner to avoid streaks.
- Wipe with a clean microfiber cloth or paper towel.
- Clean both inside and outside surfaces for clarity.
- Use a carpet cleaner or upholstery shampoo.
- Apply cleaner evenly and scrub with a brush.
- Rinse and allow to dry completely to avoid mildew.
- Use a soft brush or microfiber cloth to dust.
- Wipe dashboard with a suitable cleaner.
- Ensure vents are free of dust and debris.
- Apply a vinyl cleaner to remove dirt.
- Use a conditioner to prevent cracking and fading.
- Wipe with a microfiber cloth for a polished look.
- Identify the type of stain for best remover.
- Apply stain remover and blot, do not rub.
- Follow up with cleaning if required.
- Wipe down with a suitable cleaner for materials.
- Use a soft cloth to polish for shine.
- Check for any scratches or damage during cleaning.
- Retract seatbelts fully and inspect for dirt.
- Use a damp cloth to wipe down fabric parts.
- Allow to dry completely before retracting.
- Empty contents and sort items as needed.
- Clean the compartment with a damp cloth.
- Put back only essential items in an organized manner.
- Use disinfectant wipes or spray on cloth.
- Wipe down all high-touch surfaces thoroughly.
- Ensure all areas are dry before use.
- Refer to the owner's manual for location.
- Remove the old filter and inspect for dirt.
- Install the new filter securely.
- Choose a preferred scent, spray lightly.
- Avoid over-application to prevent overwhelming scent.
- Allow the scent to circulate by running the AC.
- Gently brush or vacuum to remove dust.
- Spot clean any stains with appropriate cleaner.
- Avoid soaking the fabric to prevent sagging.
- Turn off the vehicle before cleaning.
- Use a soft, dry cloth to wipe screens.
- Avoid using harsh chemicals that may damage displays.
Use in Manifestly