Your checklists (
0
)
AI Checklist Generator
From the makers of
Manifestly Checklists
Sign in
Email address
Email me a magic link
Home
> 3D printer maintenance package
3D printer maintenance package
Pre-Print Maintenance
Check and clean the print bed surface
Inspect and clean the extruder nozzle
Confirm that the filament is properly loaded and not tangled
Verify that the build plate is level and adjusted correctly
Calibrate the printer's temperature settings
Lubricate the necessary moving parts
During-Print Maintenance
Monitor the print progress periodically
Ensure that the filament is feeding smoothly without any obstructions
Check for any signs of filament jams or clogs
Clear any debris or excess filament from the print area
Observe the printer for any unusual noises or vibrations
Address any error messages or issues that occur during the print
Post-Print Maintenance
Remove the finished print from the build plate carefully
Clean the print bed surface to remove any leftover residue
Inspect the print for any defects or imperfections
Store or post-process the print as needed
Close the printer's software and power it off
Wipe down the exterior of the printer to remove any dust or dirt
Weekly/Bi-Weekly Maintenance
Clean the printer's fans and vents
Check and tighten any loose screws, belts, or connections
Inspect the printer's wiring for any signs of fraying or damage
Calibrate the printer's extruder steps/mm and flow rate
Update the printer's firmware if necessary
Test and replace any worn-out or damaged parts
Monthly Maintenance
Deep clean the print bed surface and extruder nozzle
Lubricate the printer's linear rods or guide rails
Inspect and clean the printer's cooling system
Check and recalibrate the printer's overall accuracy and dimensional accuracy
Conduct a test print to ensure optimal performance
Review the printer's usage logs and statistics for troubleshooting or improvements
Yearly Maintenance
Replace the printer's fans or other wearable parts if necessary
Clean or replace the printer's filters
Perform a thorough inspection of the printer's electrical components
Clean or replace the printer's belts or pulleys
Evaluate and upgrade the printer's software or hardware as needed
Consider professional servicing or maintenance if required
Download CSV
Download JSON
Download Markdown
Use in Manifestly
Use in Manifestly