Your checklists (
0
)
AI Checklist Generator
From the makers of
Manifestly Checklists
Sign in
Email address
Email me a magic link
Home
> Cessna 172 Pre start Check list
Cessna 172 Pre start Check list
Before Entering the Aircraft
Ensure the area around the aircraft is clear.
Inspect the exterior of the aircraft for any visible damage or hazards.
Check fuel and oil levels.
Entering the Aircraft
Enter the aircraft from the front or the left side.
Secure the door and ensure it is closed properly.
Cockpit Preparation
Adjust the seat and seatbelt.
Ensure that all necessary charts and documents are on board.
Pre-Start Instrument Checks
Set the altimeter to the current setting.
Check that the fuel selector is on the desired tank.
Verify that the mixture is in the full rich position.
Confirm that the throttle is in the idle position.
Set the flaps to the desired position for takeoff.
Electrical System Checks
Turn on the master switch.
Verify that all circuit breakers are in.
Check that the fuel gauge readings are normal.
Engine Start Preparations
Ensure the area is clear for engine start.
Set the parking brake.
Check that the propeller area is clear.
Engine Start Procedure
Make sure the throttle is in the idle position.
Verify that the mixture is set to full rich.
Engage the starter while monitoring engine instruments.
Once the engine starts, check for proper oil pressure.
Post-Start Checks
Allow the engine to warm up.
Check for any abnormal engine sounds or indications.
Verify that all gauges are within normal operating ranges.
Before Taxiing
Conduct a final check of the flight controls.
Set the radios and navigation equipment as required.
Brief passengers on safety procedures.
This checklist provides a structured approach to preparing for flight in a Cessna 172, ensuring that all critical aspects are covered before starting the engine.
Download CSV
Download JSON
Download Markdown
Use in Manifestly
Use in Manifestly