Checkilst with items that Read Evoke 2400B Light Package as header and with 7 rows in and out check
In Check
- Ensure all power cables are securely connected.
- Check for any loose or frayed wires.
- Confirm that the power supply is turned on.
- Test the outlet with a multimeter if necessary.
- Inspect each fixture for dents or cracks.
- Look for signs of wear or corrosion.
- Ensure mounting hardware is intact and secure.
- Document any issues for repair or replacement.
- Use a soft, lint-free cloth to wipe lenses.
- Check for scratches or cloudiness on lenses.
- Ensure no dust or debris is obstructing light.
- Replace lenses if they are excessively damaged.
- Turn on each light to verify illumination.
- Replace any bulbs that flicker or do not light.
- Check bulb wattage to ensure compatibility.
- Keep a record of any bulbs replaced.
- Access control panel to review settings.
- Ensure settings match operational requirements.
- Adjust any parameters if necessary.
- Save settings before exiting programming mode.
- Ensure batteries in remote are charged.
- Test all buttons for responsiveness.
- Check range of remote control operation.
- Replace remote if it fails to function properly.
- Ensure emergency stop functions are operational.
- Review protocols for power failure scenarios.
- Check for clear labeling of emergency exits.
- Conduct a drill to practice emergency response.
Use in Manifestly