Your checklists (
0
)
AI Checklist Generator
From the makers of
Manifestly Checklists
Sign in
Email address
Email me a magic link
Home
> chilled water pump
chilled water pump
Pre-Operation Checklist
Verify that the power supply is connected and functioning.
Check the pump's oil level and top up if necessary.
Inspect all valves to ensure they are in the correct position (open/closed).
Confirm that the system is free from leaks.
Ensure that all safety guards and covers are in place.
Here are some additional steps that could be included in the Pre-Operation Checklist section for a chilled water pump
Verify that the pump is properly aligned with the motor
Check the suction and discharge pressure gauges for accuracy
Inspect the pump and piping for any signs of corrosion or damage
Ensure that the strainer or filter is clean and unobstructed
Confirm that the correct fluid (chilled water) is present in the system
Check the operation of any control systems or sensors
Ensure that the pump's electrical connections are secure and free from corrosion
Review the manufacturer's specifications for any specific pre-operation requirements
Confirm that the cooling system is filled to the appropriate level
Test the emergency stop button to ensure it functions correctly
Operational Checklist
Start the pump and monitor the amperage and voltage.
Check the flow rate and pressure readings on the gauges.
Listen for any unusual noises or vibrations during operation.
Monitor the temperature of the chilled water output.
Confirm that the pump is operating within the specified parameters.
Here are some additional steps that could be included in the Operational Checklist section of a chilled water pump checklist
Verify that all valves in the system are in the correct position (open or closed as required)
Check for leaks around the pump and piping connections
Ensure that the pump's seals and gaskets are functioning properly and free of leaks
Monitor any control system indicators or alarms for proper operation
Inspect the lubrication levels in the pump bearings and other moving parts
Confirm that the chilled water supply and return temperatures are within expected ranges
Review the operation of any associated equipment, such as chillers or cooling towers, for proper interaction with the pump
Check the pump's strainers or filters for blockages and clean if necessary
Log all readings and observations for future reference and analysis
Ensure that the pump's start/stop control sequence is functioning correctly
Monitor the pump's cycling frequency to ensure it is not excessively starting and stopping
Observe the system for any signs of cavitation or abnormal pressure fluctuations
Confirm that the pump's performance aligns with the system design specifications
Post-Operation Checklist
Shut down the pump properly and ensure it is secure.
Check for any leaks around the pump and piping.
Inspect the pump for signs of wear or damage.
Document any maintenance performed or issues encountered.
Review system performance and make adjustments as needed.
Maintenance Checklist
Schedule regular maintenance intervals.
Clean the pump strainer and filters as required.
Inspect and replace worn seals and gaskets.
Lubricate bearings and other moving parts as per manufacturer guidelines.
Test and calibrate pressure and temperature sensors periodically.
Feel free to customize any sections or items based on specific requirements or operational standards!
Download CSV
Download JSON
Download Markdown
Use in Manifestly