Your checklists (
0
)
AI Checklist Generator
From the makers of
Manifestly Checklists
Sign in
Email address
Email me a magic link
Home
> CODED WELDING CHECKLIST
CODED WELDING CHECKLIST
1. Pre-Welding Inspection
Verify welder qualifications and certifications.
Check welding procedure specifications (WPS) for compliance.
Inspect base materials for cleanliness and proper thickness.
Ensure proper fit-up of components before welding.
Confirm availability of required tools and equipment.
2. Equipment Setup
Inspect welding machine for functionality and calibration.
Verify correct selection of welding parameters (voltage, amperage).
Check gas supply (if applicable) for purity and pressure.
Ensure proper shielding gas flow and torch settings.
3. Personal Protective Equipment (PPE)
Ensure all personnel are wearing appropriate PPE (gloves, helmet, etc.).
Confirm availability of fire-resistant clothing.
Inspect respirators or ventilation systems if applicable.
4. During Welding
Monitor welding parameters throughout the process.
Check for proper arc length and travel speed.
Inspect bead appearance for uniformity and consistency.
Ensure adequate inter-pass temperature is maintained.
5. Post-Welding Inspection
Inspect welds for defects (porosity, cracks, undercut, etc.).
Perform non-destructive testing (NDT) as required.
Measure weld dimensions against specifications.
Ensure proper post-weld heat treatment if required.
6. Documentation
Record welding data (parameters, materials used, etc.).
Compile inspection reports and NDT results.
Maintain records of welder performance and certifications.
Ensure all documentation is complete and accessible.
7. Cleanup and Safety
Ensure all tools and equipment are cleaned and stored properly.
Check work area for hazards and remove any debris.
Dispose of waste materials in accordance with regulations.
Conduct a final safety check of the area before leaving.
Download CSV
Download JSON
Download Markdown
Use in Manifestly
Use in Manifestly