create a QC checklist for the installation part at site of 1ph/3ph smart electrical meters
1. Pre-Installation Checks
2. Safety Protocols
3. Meter Installation Procedure
- Locate the main power supply switch.
- Ensure the switch is in the 'off' position.
- Use a multimeter to verify no voltage at the installation site.
- Wear appropriate personal protective equipment.
- Remove any debris or dust from the area.
- Clear space around the installation site for easy access.
- Check for any tools or materials that may obstruct the work.
- Confirm that the area meets safety regulations.
- Inspect the surface for structural integrity.
- Ensure the surface is dry and free from corrosion.
- Check that the surface material is compatible with the meter.
- Confirm that the mounting height is according to guidelines.
- Use a level tool to check horizontal alignment.
- Adjust the meter position until it is level.
- Ensure the meter face is easily readable.
- Double-check alignment before securing the meter.
- Refer to the provided wiring diagram.
- Connect wires securely using appropriate connectors.
- Double-check polarity and connection points.
- Ensure all connections are tight to prevent future issues.
- Inspect seals for any damage or wear.
- Apply weatherproofing material as specified.
- Ensure all entry points for wires are sealed.
- Verify that the meter enclosure is properly closed.
Use in Manifestly