Your checklists (
0
)
AI Checklist Generator
From the makers of
Manifestly Checklists
Sign in
Email address
Email me a magic link
Home
> CV JOINT CHECKLIST
CV JOINT CHECKLIST
1. Visual Inspection
Check for any visible damage to the CV boot.
Look for signs of grease leakage around the CV joint area.
Inspect the condition of the CV joint housing for cracks or wear.
Ensure that the CV joint is securely mounted and not loose.
2. Boot Condition
Examine the CV boot for tears, punctures, or wear.
Check for any signs of dry rot or cracking in the rubber.
Ensure that the clamps securing the boot are intact and not loose.
3. Grease Inspection
Check for adequate grease inside the CV joint.
Confirm that there is no contamination of grease with dirt or debris.
Ensure that the grease is not dried out or hard.
4. Joint Movement
Manually inspect the CV joint for smooth movement.
Rotate the joint to check for any binding or stiffness.
Listen for any unusual noises during movement, such as clicking or clunking.
5. Alignment Check
Verify that the axle is properly aligned and not bent.
Check the alignment of the CV joint with respect to the wheel hub.
6. Performance Test
Take the vehicle for a test drive to assess any vibrations or noise during turns.
Pay attention to any clicking sounds when turning sharply.
7. Documentation
Record the findings of the inspection.
Note any repairs or replacements needed.
File the checklist for future reference.
Download CSV
Download JSON
Download Markdown
Use in Manifestly
Use in Manifestly