Generator Maintenance check list

Check for any leaks or puddles of oil or coolant around the generator

Inspect the belts for signs of wear or damage

Look for any loose or corroded electrical connections

Check the exhaust system for leaks or damage

Inspect the air filters for dirt or debris

Check the cooling system for any leaks or clogs

Inspect the fuel system for any leaks or damage

Look for any signs of rodent or insect infestation

Check for any loose or missing bolts or screws

Inspect the control panel for any warning lights or error codes

Check the oil level and top up if necessary

Inspect the coolant level and top up if necessary

Check the fuel level and refill if needed

Check the hydraulic fluid level and top up if necessary

Inspect the brake fluid level and top up if necessary

Check the power steering fluid level and top up if necessary

Check the battery terminals for corrosion and clean if necessary

Test the battery voltage and replace if low

Inspect the battery cables for any signs of damage

Measure the specific gravity of the battery electrolyte

Check the battery for any signs of leakage or swelling

Ensure the battery is securely mounted in place

Tighten any loose battery terminal connections

Verify that the battery is properly connected to the generator system

Inspect the battery for any visible cracks or damage

Start the generator and listen for any unusual noises

Check the voltage output with a multimeter

Test the automatic transfer switch (if applicable)

Run a load test to ensure the generator can handle the required load

Change the oil and oil filter at recommended intervals

Replace the air filters as needed

Inspect and replace any worn or damaged parts

Keep a log of all maintenance performed on the generator

Check and tighten any loose bolts or connections

Clean and inspect the spark plugs

Test and replace the fuel filter if necessary

Inspect and clean the cooling system

Lubricate moving parts as recommended by the manufacturer