Put up new screens on windows
Preparation
- Use a tape measure to measure the height and width of each window frame.
- Round up to the nearest inch and record the dimensions.
- Repeat for all windows that need screens.
- Purchase screens that match the size of the window frames.
- Purchase spline and a spline tool if not already owned.
- Gather all materials in one place for easy access during installation.
Screen Installation
Clean Up
Testing
- Place the screen in the window frame.
- Push on the screen to ensure it is secure.
- Check that the screen fits snugly in the frame.
- Open and close the window to ensure the screen stays in place.
- If the screen is loose, adjust the tension springs.
- If the screen is too small, add weatherstripping.
- If the screen is damaged, replace it with a new one.
Final Inspection
- Inspect each window individually by opening and closing it to test the screen's stability.
- Check that the screen is flush with the window frame and is not loose or sagging.
- Verify that the screen fits snugly in the frame and there are no gaps or spaces where insects can enter.
- Tighten any loose screws or hardware on the screen or window frame.
- Replace any damaged or torn screens.
- Ensure that all screens are properly aligned and centered within the window frame.
Use in Manifestly