Your checklists (
0
)
AI Checklist Generator
From the makers of
Manifestly Checklists
Sign in
Email address
Email me a magic link
Home
> dosing pump
dosing pump
Pre-Operational Checks
Verify that the dosing pump is correctly installed and securely mounted.
Ensure that all electrical connections are properly made and insulated.
Check that the intake and discharge lines are in good condition and free of leaks.
Confirm that the chemical supply is adequate and compatible with the pump materials.
Inspect the pump for any visible signs of wear or damage.
Operational Setup
Set the desired flow rate according to the specifications.
Adjust the stroke length and frequency settings as necessary.
Calibrate the pump if required, following the manufacturer's guidelines.
Ensure that the pump is primed and free of air bubbles.
Monitoring During Operation
Observe the pump operation for any unusual noises or vibrations.
Check the flow rate periodically to ensure it remains consistent.
Monitor the chemical levels in the supply tank to prevent running dry.
Confirm that the discharge line is clear and that the chemical is being delivered as intended.
Post-Operational Procedures
Turn off the pump and disconnect power when not in use.
Clean the pump and surrounding area to prevent chemical buildup.
Document any issues or maintenance performed in the logbook.
Schedule regular maintenance checks according to the manufacturer's recommendations.
Download CSV
Download JSON
Download Markdown
Use in Manifestly