checklist for fire pump

Check for proper installation and location of the fire pump.

Ensure the fire pump is not obstructed and has adequate clearance.

Verify that all required labels and signage are present and visible.

Inspect the pump room for cleanliness and proper ventilation.

Confirm that all electrical connections are secure and in good condition.

Check the pump for any visible signs of damage or leaks.

Test the fire pump controller by simulating an alarm signal.

Verify that the controller initiates the fire pump operation automatically.

Test the manual start and stop buttons on the fire pump controller.

Check that the pump starts and stops smoothly without any unusual noises.

Ensure that the pump pressure gauge is accurate and functioning properly.

Verify that the pump pressure relief valve is properly set and in good condition.

Test the pump's automatic shutdown function by simulating a fault condition.

Check the pump's capacity and performance by conducting a flow test.

Inspect and clean the strainer or screen on the fire pump suction line.

Check and replace any worn-out or damaged gaskets, seals, or packing.

Lubricate all necessary pump bearings, shafts, and other moving parts.

Inspect and clean the pump impeller and casing for any debris or buildup.

Verify that the fire pump's driver (electric motor or diesel engine) is well-maintained.

Clean and test all pressure switches, sensors, and related control devices.

Check and replace any worn-out or expired fire pump components as per manufacturer recommendations.

Ensure that all maintenance records are up-to-date and readily accessible.

Review all relevant fire pump documentation, including manuals and certificates.

Check that the fire pump's installation and maintenance records are complete.

Verify that the fire pump meets all applicable local, state, and national codes and regulations.

Ensure that the fire pump's inspection and maintenance schedule is followed.

Document any issues or deficiencies found during the checklist inspection.

Take necessary corrective actions for any identified problems.

Keep a copy of the completed checklist for future reference and audits.