Your checklists (
0
)
AI Checklist Generator
From the makers of
Manifestly Checklists
Sign in
Email address
Email me a magic link
Home
> starting a cirrus sr22
starting a cirrus sr22
Pre-Flight Inspection
Check fuel quantity
Inspect tires for proper inflation
Check control surfaces for freedom of movement
Inspect engine for any leaks or damage
Interior Preflight
Ensure all required documents are onboard
Check seat belts and shoulder harnesses
Verify emergency equipment is present and functional
Check communication and navigation equipment
Starting Engine
Throttle set to idle
Mixture set to full rich
Master switch on
Fuel pump on
Engage starter
After Engine Start
Check oil pressure and temperature
Monitor engine instruments for proper indications
Set avionics and radios as needed
Obtain ATIS and clearance from ground control
Taxi and Runup
Release parking brake
Taxi to designated area
Perform engine runup checks
Check flight controls
Before Takeoff
Verify flaps set to proper position
Check trim settings
Confirm transponder is on and set
Verify mixture and propeller settings
Takeoff
Apply full power smoothly
Monitor airspeed and engine instruments
Rotate at proper speed
Climb out at recommended speed and altitude
After Takeoff
Retract landing gear (if applicable)
Set flaps to up position
Monitor engine performance
Contact departure control if required
This checklist should be used as a guide and may need to be modified based on the specific procedures outlined in the aircraft's Pilot Operating Handbook.
Download CSV
Download JSON
Download Markdown
Use in Manifestly
Use in Manifestly