Your checklists (
0
)
AI Checklist Generator
From the makers of
Manifestly Checklists
Sign in
Email address
Email me a magic link
Home
> Electrical Safety Inspection Checklist
Electrical Safety Inspection Checklist
1. Personal Protective Equipment (PPE)
Ensure all personnel are wearing appropriate PPE (gloves, hard hats, safety glasses).
Inspect PPE for any signs of wear or damage.
Verify that insulated tools are in good condition.
2. General Electrical Safety
Check for any visible signs of electrical hazards (frayed wires, exposed conductors).
Ensure that all electrical panels are labeled and accessible.
Verify that circuit breakers are functioning properly and not overloaded.
3. Grounding and Bonding
Inspect grounding rods and connections for corrosion or damage.
Ensure that all equipment is properly bonded to ground.
Check that ground fault circuit interrupters (GFCIs) are installed in wet areas.
4. Wiring and Installation
Review wiring methods to ensure compliance with local codes.
Inspect junction boxes for proper seals and accessibility.
Check for adequate strain relief on all wiring connections.
5. Equipment and Appliances
Inspect all electrical equipment for proper functioning and safety ratings.
Verify that all appliances have appropriate safety certifications.
Ensure that extension cords are not used as permanent wiring solutions.
6. Emergency Procedures
Review emergency shut-off procedures with all personnel.
Ensure that emergency lighting and exit signs are operational.
Confirm that first aid kits are available and stocked.
7. Documentation and Reporting
Record all findings and observations during the inspection.
Ensure that all safety inspections are documented and kept on file.
Report any safety violations or hazards to the appropriate authority immediately.
Download CSV
Download JSON
Download Markdown
Use in Manifestly
Use in Manifestly