fire extinguisher checklist

Check for proper placement of fire extinguishers in designated locations

Inspect for visible signs of damage or corrosion on the exterior of the extinguisher

Verify that the pressure gauge indicates the extinguisher is fully charged

Ensure that the pull pin is securely in place and the tamper seal is intact

Inspect the hose and nozzle for any cracks or blockages

Check the label to confirm the extinguisher is appropriate for the type of fire it is intended to extinguish

Check the pressure gauge to ensure it is within the recommended operating range

Inspect the extinguisher for any physical damage or signs of tampering

Verify that the pull pin is still in place and the tamper seal is intact

Ensure the hose and nozzle are free of obstructions and in good condition

Check the expiration date on the extinguisher and replace if necessary

Perform a thorough visual inspection of the entire extinguisher for any signs of wear or damage

Check the pressure gauge to ensure it is still within the recommended range

Verify that the pull pin and tamper seal are intact and functioning properly

Inspect the hose and nozzle for any cracks or blockages

Ensure the label on the extinguisher is still legible and accurate

Perform a hydrostatic test on the extinguisher as required by regulations

Refill or recharge the extinguisher if it has been discharged or the pressure is low

Replace any damaged or expired extinguishers with new ones

Document all inspections, maintenance, and service performed on each extinguisher

Train employees on the proper use and maintenance of fire extinguishers.