Fan Coil Unit Daily, Weekly, Monthly, preventive maintenance checklists
Daily Maintenance Checklist
Weekly Maintenance Checklist
- Turn off the unit and disconnect power.
- Remove the access panel to reach the filters.
- Inspect filters for dirt and damage.
- Clean or replace filters as necessary.
- Reinstall filters and access panel.
- Locate the condensate drain line.
- Inspect for visible clogs or debris.
- Use a wet/dry vacuum to clear blockages.
- Flush the drain line with water.
- Ensure proper drainage by observing flow.
- Turn off power to the unit.
- Inspect the fan blades for chips or cracks.
- Check motor for unusual noises or overheating.
- Ensure all screws and connections are secure.
- Replace any damaged parts as needed.
- Use a calibrated thermometer and hygrometer.
- Record temperature and humidity readings.
- Compare readings against set parameters.
- Adjust settings if readings are outside normal range.
- Ensure proper air circulation for accurate measurements.
- Visually inspect duct connections and seams.
- Look for dust accumulation or moisture.
- Use a smoke pencil to detect leaks.
- Seal any identified leaks with appropriate materials.
- Ensure ducts are free from obstructions.
- Turn off the unit and disconnect power.
- Remove the access panel to reach the filters.
- Inspect filters for dirt and damage.
- Clean or replace filters as necessary.
- Reinstall filters and access panel.
- Locate the condensate drain line.
- Inspect for visible clogs or debris.
- Use a wet/dry vacuum to clear blockages.
- Flush the drain line with water.
- Ensure proper drainage by observing flow.
- Turn off power to the unit.
- Inspect the fan blades for chips or cracks.
- Check motor for unusual noises or overheating.
- Ensure all screws and connections are secure.
- Replace any damaged parts as needed.
- Use a calibrated thermometer and hygrometer.
- Record temperature and humidity readings.
- Compare readings against set parameters.
- Adjust settings if readings are outside normal range.
- Ensure proper air circulation for accurate measurements.
- Visually inspect duct connections and seams.
- Look for dust accumulation or moisture.
- Use a smoke pencil to detect leaks.
- Seal any identified leaks with appropriate materials.
- Ensure ducts are free from obstructions.
Use in Manifestly