Fan coil unit

Pre-Installation Checks

Verify site conditions and accessibility.

Confirm installation location with project plans.

Inspect the fan coil unit for any visible damage.

Check compatibility with existing HVAC systems.

Here are some additional steps you could include in the Pre-Installation Checks section of the New Fan Coil Unit Checklist

Ensure that all necessary tools and equipment are available on-site

Verify the availability of electrical and plumbing connections as per specifications

Review manufacturer’s installation guidelines and specifications

Confirm that the unit size and capacity meet project requirements

Check for adequate clearance around the installation area for maintenance access

Inspect ductwork and piping for any obstructions or damage

Verify that the mounting hardware and supports are suitable for the fan coil unit

Ensure that the installation environment meets temperature and humidity specifications

Check local building codes and regulations for compliance

Confirm that all required permits and approvals have been obtained before installation

Installation Steps

Secure the mounting brackets to the designated location.

Connect the water supply and return lines.

Install the electrical connections as per the wiring diagram.

Ensure proper drainage setup for condensate.

Mount the fan coil unit securely to the brackets.

Post-Installation Checks

Test the water flow through the unit.

Check for leaks in water connections.

Ensure the electrical connections are secure and safe.

Calibrate the thermostat and control settings.

Here are some additional steps that could be included in the Post-Installation Checks section of a New Fan Coil Unit checklist

Verify the fan operation by running the unit at different speed settings

Inspect the air filter for proper installation and cleanliness

Confirm that air is being evenly distributed from the unit’s vents

Check the condensate drain for proper flow and ensure there are no blockages

Ensure that the unit is level and securely mounted

Inspect insulation on pipes for damage or missing sections

Test the system for noise levels and ensure they are within acceptable limits

Monitor the system for any unusual vibrations during operation

Check the system's response time to thermostat adjustments

Review the manufacturer's installation and operation manuals for compliance with local codes and standards

Operational Testing

Turn on the fan coil unit and observe its operation.

Verify airflow and temperature output.

Listen for any unusual noises during operation.

Check the operation of the condensate drain.

Here are some additional steps you could include in the Operational Testing section of the New Fan Coil Unit checklist

Measure and record the temperature differential between supply and return air

Test the control system by adjusting the thermostat settings and observing the response of the fan coil unit

Inspect the unit for any signs of refrigerant leaks or abnormal pressure readings (if applicable)

Confirm that the unit cycles on and off according to the thermostat settings

Monitor the electrical connections for proper voltage and current draw

Check for any signs of water pooling or leakage around the unit

Ensure that all safety features (like high limit switches) are functioning properly

Verify that the unit's filters are clean and properly installed

Observe the unit's operation in various modes (heating, cooling, fan only) to ensure all functions are working correctly

Document any irregularities or issues encountered during testing for follow-up

Maintenance Schedule

Establish a regular cleaning schedule for filters.

Inspect the fan and coils for dust accumulation.

Schedule annual professional inspections.

Document all maintenance activities and findings.