fire door
1. Pre-Installation Checks
2. Installation Process
- Use a level to check vertical and horizontal alignment.
- Adjust shims as necessary to achieve plumb and level.
- Secure the frame to the wall using appropriate fasteners.
- Double-check all measurements before finalizing installation.
- Lift the door into the frame carefully.
- Align the hinges with pre-drilled holes.
- Insert hinge pins and tighten screws to secure.
- Test fit the door by opening and closing it.
- Refer to design plans for swing direction.
- Confirm that the door opens toward a safe area.
- Adjust hinges if the swing is incorrect.
- Check functionality after adjusting the swing.
- Attach self-closing devices per manufacturer instructions.
- Ensure hardware is compatible with the fire door.
- Use appropriate tools and fasteners for installation.
- Verify that hardware operates smoothly after installation.
- Measure gaps with a feeler gauge or ruler.
- Adjust the door or frame if gaps exceed limits.
- Ensure consistent gap width around the entire door.
- Document any adjustments made during installation.
- Measure the door and frame dimensions accurately.
- Check that the door fits securely within the frame.
- Confirm that the door meets local code requirements.
- Note any discrepancies for resolution.
- Locate the appropriate labeling guidelines for fire doors.
- Affix labels in a visible location on the door.
- Ensure labels are legible and durable.
- Document compliance with local codes.
- Cut strips to fit door edges accurately.
- Clean surfaces before application for better adhesion.
- Press strips firmly into place, following manufacturer guidelines.
- Inspect for gaps or misalignment after installation.
- Select hinges rated for fire doors.
- Verify size and weight capacity of hinges.
- Ensure all screws are tightened firmly.
- Test door operation post-installation.
- Refer to local safety regulations for device requirements.
- Install device according to manufacturer specifications.
- Test the device to ensure it functions properly.
- Confirm compliance with safety standards.
- Open and close the door multiple times.
- Check for any sticking or binding issues.
- Adjust hinges or frame if necessary.
- Ensure the self-closing mechanism works correctly.
- Measure the bottom clearance from the floor.
- Adjust hinges if height needs to be modified.
- Ensure clearance meets fire safety guidelines.
- Check compliance with accessibility standards if applicable.
- Test locks and latches several times.
- Lubricate moving parts as needed.
- Replace any malfunctioning hardware immediately.
- Document hardware status in installation records.
- Refer to design specifications for accessory placement.
- Use appropriate fasteners for each accessory.
- Ensure accessories do not interfere with door function.
- Check for alignment and secure attachment after installation.
- Record all steps taken during installation.
- Note any deviations from standard procedures.
- Store documentation in a secure, accessible location.
- Review documentation with project stakeholders.
Use in Manifestly