Your checklists (
0
)
AI Checklist Generator
From the makers of
Manifestly Checklists
Sign in
Email address
Email me a magic link
Home
> gas detector
gas detector
Pre-Operational Checks
Inspect the gas detector for any visible damage.
Ensure the calibration date is current.
Check the battery status and replace if necessary.
Verify that the sensor is clean and free of obstructions.
Confirm that all necessary accessories are present (e.g., calibration gas, tubing).
Calibration Procedures
Gather the appropriate calibration gas and equipment.
Connect the gas detector to the calibration gas supply.
Follow the manufacturer’s instructions for calibration steps.
Record the calibration results and ensure they are within acceptable limits.
Disconnect the gas detector from the calibration gas.
Functional Testing
Turn on the gas detector and allow it to warm up as per the manufacturer's guidelines.
Test the detector with a known concentration of gas to verify response.
Observe and record the readings for accuracy.
Ensure the alarm functions (audible and visual) activate during testing.
Return the detector to normal operating mode after testing.
Daily Use Protocol
Conduct a visual inspection before each use.
Ensure the detector is powered on and functioning properly.
Confirm the alarm settings are correctly configured for the specific environment.
Carry the detector in a position that allows for accurate readings.
Regularly check for any alarms or warning indicators during use.
Post-Operational Procedures
Turn off the gas detector and clean it as necessary.
Document any incidents or alarms triggered during use.
Recharge or replace the battery if required.
Store the gas detector in a designated safe location.
Schedule the next calibration and maintenance check.
Download CSV
Download JSON
Download Markdown
Use in Manifestly
Use in Manifestly