GENERAL SAFETY INSPECTION CHECKLIST WORKPLACE FACILITY INCLUDING ELECTRICAL

I. GENERAL SAFETY

Ensure all emergency exits are clearly marked and accessible.

Check that fire extinguishers are available, charged, and inspected.

Verify that first aid kits are fully stocked and accessible.

Confirm that safety signs and labels are visible and in good condition.

Inspect walkways and hallways for obstructions or trip hazards.

Ensure that personal protective equipment (PPE) is available and in good condition.

II. WORKPLACE ENVIRONMENT

Assess the cleanliness and organization of the work area.

Check for adequate lighting in all workspaces.

Ensure that ventilation systems are functioning properly.

Inspect for any leaks or spills that could pose a hazard.

Evaluate the temperature control and comfort of the working environment.

III. EQUIPMENT SAFETY

Inspect machinery and tools for proper operation and maintenance.

Ensure that guards and safety devices are in place on equipment.

Verify that operators are trained and authorized to use equipment.

Check that tools are stored properly when not in use.

Confirm that lifting equipment is inspected and certified.

Here are some additional steps that could be included in the III. EQUIPMENT SAFETY section of the checklist

Ensure that equipment and tools are appropriate for the tasks being performed

Inspect power cords and connections for damage or wear

Verify that emergency stop buttons and safety switches are functional

Check for proper labeling and signage on equipment indicating hazards or safety instructions

Confirm that personal protective equipment (PPE) is available and used when operating equipment

Conduct regular audits of equipment safety practices and procedures

Ensure that maintenance logs for equipment are up to date and accessible

Review and update safety procedures and guidelines for equipment operation

Check that equipment is used on stable and level surfaces to prevent tipping or falling

Ensure that no unauthorized personnel have access to equipment areas

Verify that equipment is regularly serviced according to manufacturer recommendations

Confirm that there are procedures in place for reporting equipment malfunctions or safety concerns

IV. ELECTRICAL SAFETY

Inspect electrical wiring for fraying, damage, or exposed wires.

Ensure that circuit breakers and fuses are functioning properly.

Check that outlets are not overloaded and are in good condition.

Verify that extension cords are not used as permanent wiring.

Ensure that all electrical equipment is properly grounded.

Here are some additional steps that could be included in the IV. ELECTRICAL SAFETY section of the checklist

Ensure that electrical panels are clearly labeled and accessible

Inspect for the presence of GFCI (Ground Fault Circuit Interrupter) outlets in wet or damp areas

Confirm that all light fixtures are properly shielded and maintained to prevent hazards

Verify that electrical tools and equipment are in good working condition and free from defects

Check for proper use and maintenance of surge protectors

Ensure that all electrical cords and cables are routed to prevent tripping hazards

Inspect for the proper installation of electrical signage and warnings in areas with high voltage

Confirm that employees are aware of the location and operation of emergency shut-off switches for electrical systems

Review load calculations to ensure that circuits are not overloaded

Conduct regular inspections of all electrical appliances for signs of wear or malfunction

Ensure that all temporary wiring is installed according to local codes and regulations

Verify that safety guards and shields are in place for machinery that operates on electrical power

Check that all personnel working with or near electrical systems have the appropriate personal protective equipment (PPE)

Ensure that there is a clear and accessible path to all electrical shut-off points for emergencies

V. EMERGENCY PREPAREDNESS

Review emergency evacuation plans with all employees.

Conduct regular fire drills and safety training sessions.

Ensure that emergency contact information is up to date and accessible.

Check that emergency lighting systems are operational.

Review procedures for reporting incidents and accidents.

VI. TRAINING AND COMPLIANCE

Confirm that all employees have received safety training.

Review compliance with OSHA and local safety regulations.

Ensure that safety policies are documented and communicated.

Evaluate the effectiveness of safety training programs.

Conduct regular safety meetings to address concerns and updates.