HELI reach Staker pre operation

Examine the HELI Reach Staker for any visible signs of damage or wear.

Inspect the spreader bar for structural integrity and ensure all attachment points are secure.

Check the boom and arm for any cracks or deformations.

Review the condition of the tires or tracks for proper inflation and wear.

Test the spreader mechanism for smooth operation and responsiveness.

Ensure that all locking pins and safety latches on the spreader are functioning correctly.

Verify that the spreader’s load capacity is appropriate for the intended operation.

Inspect the spreader attachment points for wear and ensure they are free from debris.

Confirm that all operators are wearing appropriate personal protective equipment (PPE).

Check that first aid kits and fire extinguishers are accessible and fully stocked.

Ensure that all safety signage in the operation area is clear and legible.

Test emergency stop functions on both the HELI Reach Staker and the spreader.

Inspect fuel levels and refill as necessary, using the correct fuel type.

Check hydraulic fluid levels and ensure there are no leaks.

Review engine oil and coolant levels, topping off if required.

Inspect all hoses for wear or damage that could lead to leaks.

Test the main control panel for all operational controls and indicators.

Verify that the joystick and control levers operate smoothly without sticking.

Conduct a functional test of the hydraulic controls for the boom, arm, and spreader.

Ensure that all warning lights and alarms are operational.

Confirm that all operators have completed necessary training and certification.

Review the operational procedures and safety protocols with the team.

Conduct a pre-operation meeting to discuss roles and responsibilities.

Ensure that operators are familiar with the emergency procedures specific to the equipment.

Conduct a thorough inspection of the worksite for hazards such as overhead lines and uneven terrain.

Assess the ground stability to support the HELI Reach Staker and spreader.

Ensure there is adequate space for safe operation and maneuvering of the equipment.

Check weather conditions for factors that may affect safety and operation.

Perform a final walk-around inspection of the HELI Reach Staker and spreader.

Ensure that all tools and loose equipment are secured and stowed.

Check that all safety guards and covers are in place on both the staker and spreader.

Confirm that communication devices are functioning and that team members are in place.

Start the HELI Reach Staker and perform a brief operational check of all systems.

Monitor for any unusual sounds or irregularities during the initial operation.

Ensure that communication with all team members is established and clear.

Proceed with the operation, maintaining situational awareness and adhering to safety protocols.