Your checklists (
0
)
AI Checklist Generator
From the makers of
Manifestly Checklists
Sign in
Email address
Email me a magic link
Home
> HSE checklist to forklift
HSE checklist to forklift
1. Pre-Operation Inspection
Check the oil level.
Inspect the hydraulic fluid level.
Ensure the fuel level is adequate.
Examine the battery condition (for electric forklifts).
Inspect the tires for wear and proper inflation.
Check the forks for damage or bending.
Ensure the overhead guard is intact.
Verify that all safety devices are functioning.
2. Operator Safety
Confirm that the operator holds a valid forklift certification.
Ensure the operator is wearing appropriate personal protective equipment (PPE).
Review safe operating procedures with the operator.
Ensure the operator conducts a daily safety briefing.
3. Work Environment
Check for proper lighting in the work area.
Ensure the work area is free of obstacles.
Verify that pedestrian pathways are clearly marked and safe.
Ensure there are no overhead hazards, such as low ceilings or hanging wires.
Confirm that the ground surface is stable and level.
4. Load Handling
Verify that the load does not exceed the forklift's capacity.
Ensure loads are stable and secured before lifting.
Check that the load is balanced on the forks.
Ensure that the operator has a clear view when carrying loads.
Confirm that the load is within the forklift's load center.
5. Post-Operation Inspection
Park the forklift in a designated area.
Lower the forks to the ground.
Turn off the engine and remove the key.
Conduct a final check for any leaks or damage.
Report any maintenance needs or safety concerns.
Download CSV
Download JSON
Download Markdown
Use in Manifestly
Use in Manifestly