Your checklists (
0
)
AI Checklist Generator
From the makers of
Manifestly Checklists
Sign in
Email address
Email me a magic link
Home
> LASER MACHINE
LASER MACHINE
Pre-Operation Checks
Verify that the laser machine is clean and free of debris.
Ensure all safety equipment is in place (glasses, shields, etc.).
Check that all emergency stops are functional.
Confirm that the machine is properly grounded.
Inspect the coolant levels and ensure they are adequate.
Material Setup
Select the appropriate material for the job.
Measure and cut the material to the required dimensions.
Secure the material on the machine bed.
Check the alignment of the material with the laser focal point.
Machine Settings
Set the correct power levels for the material being used.
Adjust the speed settings according to the material specifications.
Input the correct design file into the machine's software.
Perform a test run on a scrap piece, if applicable.
Operation
Start the laser machine and monitor its operation.
Keep the work area clear and maintain a safe distance.
Watch for any unusual sounds or behavior during operation.
Stay alert for any smoke or fumes and ensure ventilation is adequate.
Post-Operation Procedures
Turn off the laser machine following the proper shutdown process.
Allow the machine to cool down if necessary.
Clean the machine and the work area of any debris or residues.
Inspect the finished product for quality and accuracy.
Document any issues or maintenance needs for future reference.
Maintenance
Schedule regular maintenance checks for the laser machine.
Clean the lenses and mirrors according to the manufacturer's guidelines.
Check all mechanical components for wear and tear.
Update software and firmware as needed.
This checklist can help ensure that the laser machine is operated safely and efficiently.
Download CSV
Download JSON
Download Markdown
Use in Manifestly