MONTHLY PREVENTIVE MAINTENANCE CHECK LIST FOR DRILING MACHINE DAILY PREVENTIVE MAINTENANCE CHECK LIST FOR DRILING MACHINE DAILY PREVENTIVE MAINTENANCE CHECK LIST FOR DRILING MACHINE

Electrical Components

Check power cords for any signs of damage or wear

Inspect electrical connections for tightness and corrosion

Test emergency stop buttons for proper functionality

Verify voltage and current readings with a multimeter

Mechanical Components

Lubricate all moving parts as recommended by manufacturer

Check belts and pulleys for wear and proper tension

Inspect chuck and spindle for alignment and runout

Verify that all safety guards are in place and functioning correctly

Coolant System

Inspect coolant reservoir for proper fluid level and cleanliness

Clean or replace coolant filters as needed

Check coolant pump for leaks or unusual noises

Test coolant flow rate and adjust as necessary

General Inspection

Clean machine surfaces and remove any debris or chips

Check for any loose or missing hardware

Verify machine alignment and levelness

Perform a test run to check for any abnormal noises or vibrations

DAILY PREVENTIVE MAINTENANCE CHECKLIST FOR DRILLING MACHINE

Power Supply

Verify that the machine is properly connected to a stable power source

Check for any tripped circuit breakers or blown fuses

Test the emergency stop button for immediate response

Tooling

Inspect drill bits for wear or damage

Check tool holders for proper seating and tightness

Verify tool change procedure for smooth operation

Safety Features

Test all safety interlocks for proper functionality

Verify emergency stop button operation

Check for any obstructions in the work area

Coolant System

Check coolant reservoir for proper fluid level and top up if needed

Inspect coolant lines for leaks or blockages

Test coolant pump for proper operation

General Inspection

Clean machine surfaces and remove any chips or debris

Check for any unusual noises or vibrations during operation

Verify proper alignment and levelness of the machine

Record any maintenance or issues for future reference.

Inspect all belts and pulleys for wear and proper tension

Check for any leaks in hydraulic or pneumatic systems

Verify that all guards and safety devices are in place and functioning properly

Inspect the condition of the drill bits and replace any that are worn or damaged

Check the accuracy of the depth and speed settings on the machine

Verify that all electrical connections are secure and free of damage

Ensure that all lubrication points are properly greased

Test the emergency stop button to ensure it functions correctly

Check the condition of the workholding fixtures and adjust as needed

Inspect the coolant system for proper fluid levels and any signs of contamination