NSW Development application architectural drawing checklist for an architectural designer

1. General Requirements

Ensure all drawings are to scale and clearly labeled.

Include a title block with project name, designer's name, and date.

Provide a site address and lot description.

Ensure all drawings are consistent (e.g., site plan matches floor plans).

Include a north point and scale bar on all relevant drawings.

2. Site Plan

Show site boundaries, dimensions, and area.

Indicate existing structures and any significant features (trees, driveways, etc.).

Provide details of setbacks from property boundaries.

Include contours or levels if applicable.

Mark any easements, rights of way, or restrictions on the property.

3. Floor Plans

Provide plans for each level of the building.

Clearly indicate the use of each room or space.

Show all door and window locations, including sizes.

Include dimensions for all rooms and spaces.

Indicate the location of plumbing and electrical fixtures.

4. Elevations

Show all external elevations (front, rear, sides).

Include height dimensions for the building and key features.

Indicate materials and finishes for external surfaces.

Provide details on roof design and pitch.

Include any external features such as balconies, awnings, or signs.

5. Sections

Provide cross-sections through the building.

Indicate floor-to-ceiling heights and details of construction.

Show relationships between different levels and spaces.

Include any relevant structural elements (beams, columns).

6. Details

Provide architectural details for critical junctions (e.g., roof to wall).

Include window and door details showing dimensions and materials.

Provide details for any special features (staircases, balustrades).

Show landscaping details where applicable.

7. Compliance and Additional Information

Ensure compliance with local zoning laws and development controls.

Include any required reports (e.g., environmental assessments).

Attach relevant certificates (e.g., bushfire assessment if applicable).

Provide information on sustainability measures (e.g., energy ratings).

8. Documentation Submission

Confirm that all drawings are signed and dated.

Ensure that all necessary documentation is included with the application.

Check for any specific requirements set by the local council.

Create a digital version of all documents for submission.

9. Review and Final Checks

Conduct a final review of all drawings and documents.

Ensure all information is accurate and complete.

Confirm that the application meets all relevant standards and guidelines.

Prepare a checklist of submitted items for personal records.