Please create an FEA checklist for people that put requests in to our simulation team

Project Information

Clearly state the project name and reference number.

Provide a brief description of the project objectives.

Specify the timeline for the simulation request.

Geometry and Model Setup

Attach the CAD model in the required format (e.g., .stp, .igs).

Provide a brief project description

Include the project timeline and deadlines

Specify the intended use of the FEA results

#### Material Properties

Provide material property data (e.g., Young's modulus, Poisson's ratio, yield strength)

Indicate any temperature-dependent material properties if applicable

#### Boundary Conditions and Loads

Specify boundary conditions (e.g., fixed supports, rollers)

Describe the types and magnitudes of loads applied (e.g., forces, pressures)

Indicate if any dynamic or time-dependent loads are involved

#### Geometry and Model Setup

Attach the CAD model in the required format (e.g., .stp, .igs)

Indicate any symmetry or periodicity in the model

Verify that the CAD model is free of errors (e.g., non-manifold edges, gaps)

Ensure that the model scale is appropriate for simulation

Define the mesh settings and refinement areas, if applicable

Specify any contact definitions between components, if applicable

Indicate if any parts are rigid or can be treated as simplified geometry

Provide details on how to handle complex geometries (e.g., fillets, holes)

Confirm the orientation of the model is correct for analysis purposes

Specify any special considerations for meshing (e.g., element types, mesh density)

Include notes on model simplifications or assumptions made during setup

#### Analysis Type

Specify the type of analysis (e.g., static, dynamic, thermal)

Indicate if nonlinear analysis is required

Provide details on analysis duration and time steps if applicable

#### Additional Considerations

Mention any software-specific requirements or limitations

Highlight any previous similar studies or benchmarks for reference

Provide context for how results will be validated or compared

#### Review and Submission

Conduct a peer review of the FEA setup prior to submission

Confirm all sections of the checklist are complete

Ensure all necessary documentation is included in the submission package

Submit the request by the designated deadline

This checklist will help ensure that all necessary information is provided for an effective and efficient simulation process

Material Properties

List all materials to be used in the simulation.

Provide the necessary material properties (e.g., Young's modulus, Poisson's ratio).

Indicate if any advanced material models are required (e.g., nonlinear, temperature-dependent).

Boundary Conditions and Loads

Define the boundary conditions clearly (e.g., fixed, roller supports).

Specify all loads to be applied (e.g., forces, pressures, thermal loads).

Include details on load cases and combinations, if applicable.

Analysis Type

Indicate the type of analysis required (e.g., static, dynamic, thermal).

Specify any specific solver requirements or settings.

Mention if any post-processing outputs are needed (e.g., stress, displacement, factor of safety).

Additional Considerations

State any specific standards or regulations that must be adhered to.

Provide any previous simulation results or studies that are relevant.

Include contact information for follow-up questions or clarifications.

Review and Submission

Review all sections for completeness and accuracy.

Ensure all necessary attachments are included.

Submit the checklist along with the simulation request to the designated team member.