powder coating daily maintenance check sheet

Check the condition of the spray gun.

Inspect hoses for wear and leaks.

Examine the powder coating booth for cleanliness.

Ensure the recovery system is functioning properly.

Verify that there is an adequate supply of powder.

Check the powder storage area for proper sealing and labeling.

Inspect powder containers for damage or contamination.

Confirm that all personal protective equipment (PPE) is available and in good condition.

Ensure that fire extinguishers are accessible and inspected.

Check that safety data sheets (SDS) for all powders are available.

Inspect air compressor for proper operation and leaks.

Check air filters and replace if necessary.

Ensure that the air pressure is set to the recommended levels.

Here are some additional steps you could include in the Air Supply section of your powder coating daily maintenance checklist

Inspect air hoses for wear, damage, or leaks

Ensure proper connections and fittings are secure and leak-free

Check the moisture trap and drain it to remove any accumulated water

Monitor air quality for contaminants and ensure it meets specifications

Verify the operation of any automatic drain valves on the air system

Confirm that all air supply lines are adequately insulated to prevent condensation

Test the air pressure regulator for accurate pressure readings

Perform a visual inspection for any signs of corrosion on air supply components

Document any issues found and corrective actions taken

Review the air supply system’s maintenance log for any overdue services or inspections

Inspect power cords and connections for damage.

Check circuit breakers and fuses for functionality.

Ensure that emergency stop buttons are operational.

Clean the spray booth surfaces as per the maintenance schedule.

Remove any overspray from equipment and surrounding areas.

Dispose of waste materials according to environmental regulations.

Record any maintenance performed in the logbook.

Note any issues or anomalies for follow-up.

Ensure that all team members have signed off on the daily checklist.