pre - production checklist checking line clearance , ctp plate ,referance sample , material n specs

Verify that the production area is clean and free from any previous job materials.

Ensure that all tools and equipment are properly cleaned and stored.

Check that the plates match the specifications outlined in the job order.

Inspect the plates for any defects or damage before use.

Compare the reference sample with the current job specifications to ensure consistency.

Document any discrepancies between the reference sample and the new job requirements.

Ensure that all team members are aware of the reference sample for quality control.

Here are some additional steps that could be included in the Reference Sample section of the checklist

Verify that the reference sample is from a previous job that is relevant and comparable to the current job

Check for any updates or changes in the color, texture, or finish of the reference sample that may affect the new job

Conduct a visual inspection of the reference sample for any defects or imperfections that need to be addressed

Ensure that the reference sample is properly labeled and stored in an accessible location for easy reference during production

Confirm that the reference sample has been approved by the relevant stakeholders (e.g., quality control, production manager)

Schedule a meeting with the team to discuss the reference sample and address any questions or concerns

Create a checklist to cross-reference specific attributes of the reference sample against the new job specifications

Provide training or a refresher session on the importance of the reference sample in maintaining quality standards

Monitor the production run closely to ensure adherence to the reference sample throughout the process

Collect feedback from the production team regarding the reference sample and its impact on the workflow for future improvements

Confirm that all raw materials needed for production have been received and are of the correct type and quality.

Check that material specifications match the job requirements, including color, weight, and texture.

Inspect all materials for defects or damage before starting production.