Your checklists (
0
)
AI Checklist Generator
From the makers of
Manifestly Checklists
Sign in
Email address
Email me a magic link
Home
> PRESSURE GAUGE CHECKLIST
PRESSURE GAUGE CHECKLIST
1. PRE-CHECKS
Inspect the area around the pressure gauge for any hazards.
Ensure that personal protective equipment (PPE) is worn as required.
Verify that the pressure gauge is rated for the application.
2. VISUAL INSPECTION
Check for any signs of physical damage on the gauge.
Ensure that the gauge face is clear and readable.
Inspect the connection points for any leaks or corrosion.
3. FUNCTIONAL TEST
Verify that the gauge is properly connected to the system.
Apply a known pressure to the gauge and observe the reading.
Compare the gauge reading to a calibrated reference gauge.
4. CALIBRATION CHECK
If the gauge is out of specification, schedule a calibration.
Document any discrepancies found during the calibration check.
Ensure that calibration certificates are up to date.
5. MAINTENANCE AND CLEANING
Clean the gauge face and housing if necessary.
Check and replace any worn or damaged seals.
Test the functionality of any additional features (e.g., alarms).
6. FINAL VERIFICATION
Confirm that all checks have been completed and documented.
Ensure that the pressure gauge is properly labeled with its status.
Store the checklist in the appropriate location for future reference.
Download CSV
Download JSON
Download Markdown
Use in Manifestly
Use in Manifestly