refuelling

Verify the refuelling procedure and safety guidelines.

Ensure that the area is clear of unauthorized personnel.

Check for any fuel leaks or spills on the equipment.

Inspect the refuelling equipment for damage or malfunction.

Here are some additional steps that could be included in the Pre-Refuelling Checks section of the refuelling checklist

Confirm that all required personal protective equipment (PPE) is available and being worn by personnel

Ensure all refuelling nozzles and hoses are properly connected and secured

Verify that the refuelling equipment is grounded to prevent static electricity buildup

Check fuel type and quantity to ensure correct fuel is being used for the operation

Review the fuel transfer procedures and ensure all personnel are familiar with their roles

Inspect emergency shut-off valves and ensure they are functioning properly

Ensure that fire extinguishers and spill containment materials are readily accessible and in good condition

Confirm that communication devices (e.g., radios, phones) are operational and available for use during refuelling

Ensure that the weather conditions are suitable for refuelling operations (e.g., no high winds, lightning)

Check that the refuelling area is properly marked and barriers are in place to restrict access

Gather all necessary refuelling equipment (hoses, nozzles, etc.).

Ensure that all equipment is clean and free from contaminants.

Verify that the fuel type matches the requirements of the vehicle/equipment.

Ground the vehicle/equipment to prevent static electricity.

Open the fuel tank cap carefully.

Connect the refuelling nozzle securely to the fuel tank.

Begin refuelling, monitoring for any spills or overflows.

Stop refuelling once the tank is full or as indicated.

Disconnect the refuelling nozzle carefully.

Replace the fuel tank cap securely.

Inspect the area for any spills and clean up if necessary.

Record the amount of fuel dispensed for inventory tracking.

Review emergency shut-off procedures in case of a spill or fire.

Ensure that a fire extinguisher is readily accessible.

Report any incidents or near misses to the supervisor.

Review safety equipment (PPE) worn during the refuelling process.