repair and maintenance checklist for Airconditioning, powerhouse,water system,

Inspect and replace air filters as needed based on usage.

Verify refrigerant levels and recharge if below specified limits.

Clean both condenser and evaporator coils thoroughly.

Inspect and seal ductwork to improve energy efficiency.

Test thermostat accuracy and replace batteries if applicable.

Clear any debris from outdoor units to ensure proper airflow.

Check and clean condensate drain pans to prevent water damage.

Document all maintenance activities and update the odometer reading.

Note the odometer reading for generator operating hours.

Conduct visual inspections of all generators for visible damage.

Change fuel filters according to the manufacturer's schedule.

Flush and clean the cooling system to remove build-up.

Inspect battery terminals for corrosion and clean as needed.

Review and update maintenance logs for all equipment.

Conduct functionality tests on emergency shutdown systems.

Monitor performance metrics and compare against benchmarks.

Schedule maintenance based on accumulated operating hours.

Log the odometer reading for pump operating hours.

Conduct routine water quality tests for contaminants.

Inspect and service pumps based on usage metrics.

Replace or clean filters in the water supply system.

Check for leaks in pipes and fittings during inspections.

Document water pressure readings and address fluctuations.

Verify the operation of all backflow prevention devices.

Maintain cleanliness of water storage tanks and reservoirs.

Review maintenance history and plan for upcoming service needs based on odometer readings.