Roll Off bin inspection checklist
1. General Inspection
2. Structural Integrity
3. Doors and Latches
- Test each door individually.
- Observe for any sticking or resistance.
- Listen for unusual noises during operation.
- Ensure doors return to the closed position without assistance.
- Examine latches for rust or corrosion.
- Check hinges for smooth movement.
- Look for any signs of damage or excessive wear.
- Test latches to confirm they securely hold doors closed.
- Inspect door frames for debris or foreign objects.
- Ensure seals are intact and not obstructed.
- Clear any items that may interfere with door movement.
- Verify that the ground area around doors is level and clear.
- Close all doors completely.
- Engage the latch mechanism.
- Test the latch by pulling on the door.
- Ensure no gaps are present when latched.
- Visually examine seals for cracks or tears.
- Check for signs of wear or compression.
- Ensure seals are properly fitted and not loose.
- Replace any damaged seals immediately.
- Test each lock individually.
- Check for smooth operation of keys or levers.
- Lubricate locks if necessary.
- Replace any faulty locks.
- Inspect all metal components for rust.
- Clean any rusted areas with appropriate cleaners.
- Apply rust inhibitor if necessary.
- Replace any heavily corroded components.
- Close doors and observe gaps.
- Adjust hinges if doors do not align.
- Check for obstructions preventing proper closure.
- Ensure all adjustments are secured.
- Check for tightness of handle screws.
- Test handle functionality by opening and closing.
- Look for any signs of wear or damage.
- Replace handles that are loose or broken.
- Visually inspect the frame for bends or dents.
- Check for structural integrity of the frame.
- Ensure that door can still operate smoothly.
- Repair or replace damaged frames as needed.
- Locate all safety labels.
- Ensure labels are not faded or damaged.
- Replace any illegible labels.
- Confirm labels are securely attached.
- Test the automatic opening and closing functions.
- Check for any unusual noises during operation.
- Inspect electrical connections and sensors.
- Schedule repairs for any malfunctioning systems.
Use in Manifestly