Your checklists (
0
)
AI Checklist Generator
From the makers of
Manifestly Checklists
Sign in
Email address
Email me a magic link
Home
> secondary pump
secondary pump
Pre-Operation Checks
Inspect the pump for any visible leaks or damage.
Ensure that all valves are in the correct position (open/closed as necessary).
Check the power supply and ensure the pump is properly connected.
Verify that the control panel is functioning and ready for operation.
Certainly! Here are some additional steps that could be included in the Pre-Operation Checks section of the New Secondary Pump Checklist
Confirm that the suction and discharge piping are properly connected and secure
Check the alignment of the pump and motor to ensure they are properly aligned
Inspect the strainer or filter for cleanliness and ensure it's free of debris
Verify that the pump's operating parameters (e.g., flow rate, pressure) are set according to specifications
Ensure that all necessary safety guards and covers are in place
Check the lubrication levels in bearings and other moving parts, and ensure they are adequate
Inspect the vibration dampeners and mounts for wear or deterioration
Confirm that any necessary flow meters or pressure gauges are operational and calibrated
Ensure that emergency stop buttons and safety interlocks are functional
Review the operating manual for any specific pre-operation requirements related to the pump model
Operational Checks
Start the pump and monitor for any unusual noises or vibrations.
Check the flow rate and pressure readings against standard operating parameters.
Observe the pump for signs of overheating or excessive wear.
Ensure that the discharge and suction pressures are within acceptable limits.
Post-Operation Checks
Turn off the pump and allow it to cool down.
Inspect for any leaks or issues that may have arisen during operation.
Document the operational performance and any anomalies noted during the run.
Clean the area around the pump and ensure it is free of debris.
Maintenance and Follow-Up
Schedule routine maintenance based on operational hours and manufacturer recommendations.
Review any performance data with the maintenance team for analysis.
Replace any worn or damaged parts as needed.
Update the maintenance log with all findings and actions taken.
Download CSV
Download JSON
Download Markdown
Use in Manifestly
Use in Manifestly