Your checklists (
0
)
AI Checklist Generator
From the makers of
Manifestly Checklists
Sign in
Email address
Email me a magic link
Home
> start up of Yanmar J45 diesel engines on yacht
start up of Yanmar J45 diesel engines on yacht
Pre-Start Checks
Verify that all safety equipment is in place and functional.
Check the fuel level and ensure there is enough diesel for operation.
Inspect the engine compartment for any leaks or signs of wear.
Ensure the engine oil level is within the recommended range.
Check the coolant level in the engine cooling system.
Inspect the battery connections and ensure they are secure and corrosion-free.
Confirm that all necessary gauges are functioning properly.
Fuel System Inspection
Inspect fuel lines for any cracks or leaks.
Check the fuel filter for any signs of blockage or contamination.
Ensure the fuel shut-off valve is in the open position.
Bleed the fuel system if necessary to remove any air pockets.
Electrical System Checks
Ensure the battery is charged and in good condition.
Check the switch panel for any warning lights or indicators.
Test the starter motor by engaging the start switch (without cranking the engine).
Engine Start-Up Procedure
Ensure the transmission is in neutral.
Turn the ignition key to the "On" position and wait for the glow plugs to heat (if applicable).
Crank the engine by turning the ignition key to the "Start" position.
Monitor the oil pressure gauge after starting.
Post-Start Checks
Listen for any unusual noises from the engine.
Check for leaks around the fuel system and engine.
Inspect the exhaust for excessive smoke or abnormal colors.
Allow the engine to warm up and check the temperature gauge for proper readings.
Verify that the charge indicator shows the battery is being charged.
Operational Checks
Test throttle and gear shift operations to ensure smooth engagement.
Monitor engine performance at various RPMs to ensure proper operation.
Check all gauges regularly for any anomalies during operation.
Shut Down Procedure
Gradually reduce the engine speed to idle.
Allow the engine to cool down for a few minutes.
Turn off the ignition to shut down the engine.
Close the fuel shut-off valve.
Inspect the engine compartment for any issues before leaving the vessel.
Download CSV
Download JSON
Download Markdown
Use in Manifestly
Use in Manifestly