Your checklists (
0
)
AI Checklist Generator
From the makers of
Manifestly Checklists
Sign in
Email address
Email me a magic link
Home
> SWIMMING POOL Pre-Start Up
SWIMMING POOL Pre-Start Up
1. Safety Inspection
Check for any hazards around the pool area.
Ensure all safety equipment (lifebuoys, poles, etc.) is in place and functional.
Verify that the pool area is free of debris and obstacles.
Confirm that emergency exits are accessible and clearly marked.
2. Water Quality Testing
Test pH levels.
Test chlorine (or other sanitizer) levels.
Check alkalinity and hardness levels.
Ensure water clarity meets standards.
3. Equipment Check
Inspect pool filter for proper function and cleanliness.
Check pump operation and ensure there are no leaks.
Verify that heaters are operational (if applicable).
Ensure all lights are functional and replace any burnt-out bulbs.
4. Chemical Preparation
Ensure all necessary chemicals are available and stored safely.
Prepare and label any chemicals needed for start-up.
Review safety data sheets (SDS) for all chemicals on-site.
5. Maintenance Tasks
Clean pool surfaces (tile, walls, floor) of any debris or algae.
Vacuum the pool if necessary.
Brush the walls and tile line to remove any buildup.
Inspect and clean skimmers and main drains.
6. System Start-Up
Turn on the pool pump and filtration system.
Monitor for any unusual sounds or issues during start-up.
Run the pump for a pre-determined time to ensure circulation.
7. Final Review
Conduct a final walk-through of the pool area.
Ensure all safety devices are in place and operational.
Confirm that water levels are appropriate.
Document any issues that need to be addressed before opening.
Download CSV
Download JSON
Download Markdown
Use in Manifestly
Use in Manifestly